Giới thiệu
The UP-485-R is an industrial-grade RS-485/RS-422 repeater and converter, which can convert the RS-485/RS-422 signal in high rate with 2500V optical isolation, and extend the RS-485/422 distance up to 1.2km, effectively avoid damage caused by lightning strikes, surges and other factors.
UP-485-R supports serial data rates up to 115,200bps, auto-sensing and self-adjusting, no DIP switch or jumpers are required, which widely used in intelligent power management, power system automation, water conservancy monitoring, industrial automation, distributed data acquisition and other occasions.
Đặc trưng
- Smart design, RS-485/422 wiring conversion without jumpers
- Extend communication distance up to 1.2Km (9.6Kbps)
- Plug and play (hot-pluggable)
- Built-in 600W surge protection, 15kV static protection and circuit protection
- Support 2500V optical isolation
- Supports up to 128 nodes of RS-485/RS-422 devices
- Support DIN-Rail or wall mount installation
- Working temperature range:-40~85°C
Thông số kỹ thuật
|
Technical parameters |
|
|
Standard |
Compliant with EIA RS-485/RS-422 standards |
|
Connector |
Industrial terminal block |
|
Baud Rate |
300bps~115.2Kbps |
|
LED Indicator |
|
|
Power indicator |
POW(Red): Always light up when the power is connected properly |
|
Serial port Indicator |
︾(Green): Flashes when data is being sent or received ︽(Yellow): Flashes when data is being sent or received |
|
Power |
|
|
Power Supply |
External supply DC5V, external supply DC 9~30V |
|
Interface |
Industrial terminal block |
|
Lightning protection |
600W |
|
Static protection |
15KV |
|
Optical Isolation |
2500V |
|
Physical Characteristics |
|
|
Shell |
DIN rail shell |
|
Dimension |
126mm& 34mm& 72mm |
|
Weight |
80g |
|
Transmission distance |
|
|
Serial port line |
RS-485/RS-422, 1.2km@9600bps |
|
Working Environment |
|
|
Working Temp |
-40~85°C |
|
Storage Temp |
-40~85°C |
|
Relative Humidity |
5%~95% (no-condensation) |
Các sản phẩm cùng Series
| Model | Description |
| MW1040-I-R | Industrial RS-485/RS-422 Isolator/Repeater/Converter, 3000V Opto-isolation, DC9-36V |
| UP-485-R | Industrial RS-485/RS-422 Isolator/Repeater/Converter, 2500V Opto-isolation, DC9-30V |
| UP-232-P | RS232 Three Wire Signal Isolated Protector, 300～38.4Kbps, 2500V Opto-isolation |
| UP-232-H4 | Industrial 1-port RS-232 to 4 ports RS-232 Isolation HUB, 2500V Opto-isolation, DC9-30V |
| UP-485-H4 | Industrial 1-port RS-232/RS-485 to 4 ports RS-485 Isolation HUB, 2500V Opto-isolation, DC9-30V |