PIES1014G-4GS-8P UPCOM Switch công nghiệp POE 8 cổng Gigabit PoE + 2 cổng Gigabit Ethernet Uplink + 4 cổng Gigabit SFP

Specification

Product Name

14 ports Gigabit Managed Industrial POE Switch

Port Definition

8 Gigabit PoE Ports +2 Gigabit Uplink Port + 4 Gigabit SFP + 1 Console Port

Network Protocols

IEEE802.3

IEEE802.3u

IEEE802.3z

IEEE802.3ab

IEEE802.3x

IEEE802.1d

IEEE802.1w

PoE Parameters

POE Standard: IEEE802.3at (30W) and IEEE802.3af (15.4w)

Each port Max：15.4 W (IEEE 802.3af)

Each port Max：30 W (IEEE 802.3at)

PoE Compatibility：IEEE 802.3af/at adaptive

POE Power Output: DC48-55V

POE power supply core：1/2+ ; 3/6-

Network Media

10BASE-T: Cat3,4,5 UTP(≤100 m)

100BASE-TX: Cat5 or above UTP(≤100 m)

1000BASE-TX: Cat5 or above UTP(≤100 m)

Gigabit Fiber

LC connector

Multi-mode：850nm,1310nm distance：550m/2Km

Single-mode：1310nm,1550nm distance：20/40/80/100/120Km

Hardware parameter

Bandwidth

28Gbps

Package Forwarding Rate

20.83Mpps

RAM

128MB

Flash

16MB

Packet Buffer Memory

4M

Jumbo frame

9.6Kbytes

VLANs

4096

MAC address

8K

Forwarding mode

Store-and-forward

L2 management

Port Management

Support for enabling/disabling ports

Support speed, duplex, MTU settings, etc.

Support flow control flow control settings

Support port mirroring

Support port in/out direction

Support port speed limit

Support port isolation setting

Unknown unicast, multicast, broadcast storm suppression

STP

Standard Spanning Tree (STP) 802.1d

Rapid Spanning Tree (RSTP) 802.1w

Multiple Spanning Tree (MSTP) 802.1s

Ring Network Protocol

ERPS

Link Aggregation

Support static manual aggregation

Support LACP dynamic convergence

VLAN

Support VLAN and IEEE 802.1Q VLAN

GVRP

Support GVRP, Global configuration, port configuration

IGMP Snooping

Support static add / delete

MAC

Support static add/delete

MAC address learning limit

Support dynamic aging time settings

L3 ( Layer 3 Switching ) and Router Function

Interface Configuration

Support virtual VLAN interface

ARP

Support check ARP

Router Function

Static Router

Extended Function

ACL

Based on the source MAC, destination MAC, protocol type, source IP, destination IP, L4 port number

Support time-range time management

QOS

Based on 802.1p (COS) classification

Based on DSCP classification

Based on the source IP, destination IP, port number classification

Support SP, WRR, DRR scheduling strategy

Support traffic speed limit CAR

LLDP

Support LLDP link discovery protocol

User Setting

Support add/delete user

Log

User login, operation, status, event log

Port security

Dyning Gasp,SNMP Trap

Prevent Attack

DOS defense

Support for CPU protection, limited to send CPU message rate

ARP binding (IP, MAC, PORT binding)

System Management

Device reset, configuration save/restore, upgrade management, time setting, etc.

Management Function

CLI

Support serial command line management

TELNET

Support serial command line management

SSH

Support SSHv1/2 remote management

SNMP

Support v1/2/3

WEB

Support two layers of settings

PoE

PoE Power management

LED Indicator

PWR

Lighting：Powered

Off：No Power

SYS

Lighting：System is operating normally

Un-Light：System is not running

Yellow light

Lighting：PoE Powered

Un-Light：No PoE Powered

Green light

Slow Flashing：10/100/1000 Link normally

Un-Light：Link disconnect

Flashing：Link data transmission

G11-G14

Lighting：Fiber Connection is Normal

Un-Light：Disconnect

Flashing：Link data transmission

Power Supply

Type of input: 4 PIN Industrial Terminal(block V1+V1- V2+ V2-)

Input Voltage: DC12~55V

Physical structure

Shell protect grade: IP40

Installation: DIN rail

N.W:：1KG G.W: 1.3KG（without power supply）

Product Dimension (L& W& H): 188MM*130MM*65MM

Package Dimension (L& W& H): 250MM*210MM*88MM

Working Environment

Operating temperature: -40～75°C

Storage temperature: -40～85°C

Humidity: 5%~95 % ( No condensation)