MES5000 Series
MES5000 series are 28-port 100M/gigabit layer 2 managed industrial Ethernet switches. This series have seven types of products and adopt modular design, which supports 3 4-port 100M fiber/copper port modules. They provide various interfaces like 100M copper port, 100M fiber port and gigabit SFP slot and adopt 1U rack mounting, which can meet the requirements of different scenes.
Nội dung bài viết [hide]
MES5000 series are 28-port 100M/gigabit layer 2 managed industrial Ethernet switches. This series have seven types of products and adopt modular design, which supports 3 4-port 100M fiber/copper port modules. They provide various interfaces like 100M copper port, 100M fiber port and gigabit SFP slot and adopt 1U rack mounting, which can meet the requirements of different scenes.
Network management system supports various network protocols and industrial standards, such as STP/RSTP, 802.1Q VLAN, QoS, LLDP, IGMP Static Multicast, Port Trunking, Port Mirroring, etc. It also possesses complete management functions, including Port Configuration, Port Statistics, Access Control, Network Diagnosis, Rapid Configuration, Online Upgrading and so on, and supports CLI, WEB, Telnet, SNMP and other access methods. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.
The products are up to the industrial standards of IEC61850 and IEEE1613, and have acquired SGCC’s (State Grid Corporation of China) Class A authentication and CSG’s (China Southern Grid) type test. When power supply or port has link failure, ALARM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It is designed for power industry and can be widely used in the controller layer and process layer network of substations.
|
Standard &Protocol |
IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3z for 1000Base-X IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol EEE 802.1Q for VLAN IEEE 802.1p for CoS IEEE 802.1AB for LLDP
|
| Management |
SNMP v1/v2c Centralized Management of Equipment, Port Mirroring, QoS, LLDP, DHCP Server, DHCP Client, File Management, Port Statistics
|
| Security |
Classification of User Permissions, Port Alarm, Power Supply Alarm, E-mail Alarm
|
| Switch Function |
802.1Q Vlan, Static Port Aggregation, Bandwidth Management, Flow Control
|
|
Unicast / Multicast
|
Static Multicast, GMRP, IGMP-Snooping |
|
Redundancy Protocol
|
SW-Ring, STP/RSTP
|
| Time Management |
SNTP, PTP
|
| Interface |
Copper port: 10/100Base-T(X), RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/MDI-X Autotunning Fiber port: 100Base-FX, SC/ST/FC optional SFP slot: 1000Base-SFP Console port: CLI command line management port(RS-232), RJ45 Alarm port: 2-pin 7.62mm pitch terminal blocks, support 1 relay alarm output, current carrying capacity is 5A@30VDC or 10A@125VAC
|
|
LED Indicator |
Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator
|
|
Switch Property |
Transmission mode: store and forward MAC address: 8K Packet buffer size: 3Mbit Backplane bandwidth: 12.8G Switch time delay: <10μs
|
|
Power Requirement |
Dual power supply redundancy, AC or DC power supply optional AC power supply: 90~264VAC, support 8A over-current protection DC power supply: 36~72VDC, support 5.5A over-current protection
|
|
Power Consumption
|
No-load: 19.4W@220VAC Full-load: 21.9W@220VAC |
|
Environmental Limit |
Operating temperature range: -40~75℃ Storage temperature range: -40~85℃ Relative humidity: 5%～95%（no condensation）
|
|
Physical Characteristic |
Housing: IP40 protection, metal Installation: 19-inch 1U rack mounting Dimension (W x H x D): 441.6mm×290mm×44.45mm Weight: 4.5kg
|
|
Industrial Standard |
IEC 61000-4-2 (ESD), Level 4 Air discharge: ±15kV Contact discharge: ±8kV
IEC 61000-4-3 (RS), Level 3 Test level: 20V/m Frequency range: 80MHz~1000MHz
IEC 61000-4-4 (EFT), Level 4 Power supply: ±4kV Ethernet port: ±2kV Relay: ±2kV
IEC 61000-4-5 (Surge), Level 4 Power supply: common mode±4kV, differential mode±2kV Ethernet port: ±2kV
IEC 61000-4-6 (CS), Level 3 Test level: 10V Frequency range: 150kHz-80MHz
IEC 61000-4-8 (PFMF), Level 5 Stable magnetic field: 100A/m
IEC 61000-4-9, Level 5 Magnetic field strength: 1000A/m
IEC 61000-4-10, Level 4 Magnetic field strength: 30A/m Test frequency: 100kHz and 1MHz
IEC 61000-4-12, Level 5 Test level: common mode 2.5kV, differential mode 1kV Test frequency: 1MHz, 100kHz
IEC 61000-4-29 Voltage interrupts: 0%UT Duration: 100ms, 3 times
Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6
|
|
Certification |
CE, FCC, RoHS, IEC61850, IEEE1613, Class A of SGCC(Test standards: Q/GDW 11202.4-2014, Q/GDW 1429-2012, DL/T 1241-2013), CSG(Type test)
|
|
Warranty |
5 years
|
| Available Models | Gigabit SFP Slot | 100M Fiber Port | 100M Copper Port | Power Supply Range |
|
MES5000-4GS-24T |
4 | 0 | 24 |
90~264VAC or 36~72VDC dual power supply |
| MES5000-4GS-20T4F | 4 | 4 | 20 | |
| MES5000-4GS-16T8F | 4 | 8 | 16 | |
| MES5000-4GS-12T12F | 4 | 12 | 12 | |
| MES5000-4GS-8T16F | 4 | 16 | 8 | |
| MES5000-4GS-4T20F | 4 | 20 | 4 | |
| MES5000-4GS-24F | 4 | 24 | 0 |
Quý khách hàng sau khi chọn được sản phẩm phù hợp có thể mua hàng bằng 2 hình thức sau:
1 Trực tiếp:
Quý khách để lại thông tin ở phần Nhận Báo Giá hoặc Liên Hệ, bao gồm SĐT - Sản phẩm muốn mua - Địa chỉ nhận hàng. Nhân viên của Hải Phong sẽ liên hệ tới bạn trong vòng 12h.
Trân trọng cảm ơn...!
12-05-2023
 với đầu cái (Female) trong bộ đầu nối MPO.jpg)
Viết đánh giá