Giới thiệu
Cost-effective Full PoE+ Power and Gigabit Extension Solution Ideal for Hardened Environment
Featuring Plug and Play designed to be installed in heavy industrial demanding environments, PLANET IGS-1020PTF is an Industrial-grade, DIN-rail type Unmanaged Gigabit Ethernet PoE+ Switch with eight 10/100/1000BASE-T ports featuring IEEE 802.3at PoE+ and two 100/1000BASE-X fiber optic interfaces for uplink connection.
The IGS-1020PTF is designed with redundant power system and is able to operate reliably, stably and quietly in any hardened environment without affecting its performance. It comes with a total power budget of up to 240 watts for different kinds of PoE applications and operating temperature ranging from -40 to 75 degrees C in a rugged IP30 metal housing.
Đặc trưng
- 8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3af/at PoE+ Injector (Ports 1 to 8)
- 2 100/1000BASE-X SFP slots for SFP transceiver type auto detection (Ports 9 to 10)
Thông số kỹ thuật
| Hardware Specifications | |
|---|---|
| Copper Ports | 8 10/100/1000BASET RJ45 auto-MDI/MDI-X ports |
| PoE Injector Ports | 8 ports with 802.3at PoE+ injector function (Ports 1 to 8) |
| SFP Slots | 2 1000BASE-SX/LX/BX SFP interfaces (Ports 9 to 10) Compatible with 100BASE-FX SFP |
| Connector | Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 |
| DIP Switch | Standard/Extend mode (Extend mode for Ports 5 to 8 only) |
| Power Requirements | 48~54V DC, 7A (max.) |
| Power Consumption | Max. 5.6 watts/19BTU@54V DC input (System) Max. 7.28 watts/24BTU@54V DC input (Ethernet Full Loading) Max. 265.1 watts/904BTU@54V DC input (Ethernet + PoE Full Loading) |
| Dimensions (W x D x H) | 66 x 106 x 152 mm |
| Weight | 837g |
| Enclosure | IP30 metal case |
| Installation | DIN-rail/ wall-mount/side wall-mount |
| ESD Protection | 6KV |
| LED Indicators | 3 x LED for System and Power: Green: DC Power 1 Green: DC Power 2 Red: Power Fault Alarm 8 x LED for PoE Copper Port (Ports 1 to 8): Green: LNK/ACT (10/100/1000Mbps) Amber: PoE-in-Use 2 x LED for 100/1000X Fiber Port (Ports 9 to 10): Green: LNK/ACT (100/1000Mbps) Amber: 1000Mbps 4 x LED for PoE Usage Amber: 60W, 120W, 180W and 240W |
| Switch Specifications | |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 20Gbps |
| Throughput (packet per second) | 14.8Mpps@64bytes |
| Address Table | 8K entries |
| Buffer Memory | 4M bits on-chip buffer memory |
| Jumbo Frame | 9Kbytes |
| Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
| Power over Ethernet | |
| PoE Standard | IEEE 802.3at Power over Ethernet Plus/PSE |
| PoE Power Supply Type | End-span |
| Power Pin Assignment | 1/2 (+), 3/6 (-) |
| PoE Power Output | Per port 48~54V DC. Max. 30 watts |
| PoE Power Budget (max.) | 240W maximum |
| Max. Number of Class 3 PDs@25W | 8 |
| Standards Conformance | |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Stability Testing | IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) |
| Standards Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3z Gigabit Ethernet over Fiber Optic IEEE 802.3az Energy Efficient Ethernet (EEE) IEEE 802.3at Power over Ethernet Plus IEEE 802.3af Power over Ethernet |
| Environment | |
| Temperature | Operating: -40~75 degrees C Storage: -40~85 degrees C |
| Humidity | Operating: 5~95% (non-condensing) Storage: 5~95% (non-condensing) |